Dell U3011 Setting Up page 24

Wide Mode
Horizontal Position
Vertical Position
Sharpness
Noise Reduction
Pixel Clock
Phase
Dynamic Contrast
Display Info
Reset Display Settings
Audio Settings
support.dell.com/support/edocs/monitors/u3011/en/ug/operate.htm
Adjust the image ratio as 16:9, 4:3, 1:1, Aspect or full screen.
Use the or to adjust image left or right. Minimum is '0' (-). Maximum is '100' (+).
Use the or to adjust image up or down. Minimum is '0' (-). Maximum is '100' (+).
NOTE: Horizontal Position and Vertical Position Adjustments are only available for "VGA" input.
This feature can make the image look sharper or softer. Use
Improve the motion picture quality by reducing noise on image edge.
NOTE: Noise Reduction is only available for Multimedia, Game and Movie modes.
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use the or to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine),
again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Allows you to increase the level of contrast to provide sharper and more detailed image quality. (Brightness control is disabled while in Dynam
Contrast mode and will be grayed out.)
Touch the button to select the Dynamic Contrast "On" or "Off" .
NOTE: Dynamic Contrast is only available for Game and Movie color preset modes.
Displays the monitor's current settings.
Select this option to restore default display settings.
Select this option to adjust the audio settings.
or to adjust the sharpness from '0' to '100'.
6/14