Dell U3011 Setting Up page 21

Icon Menu and Submenus
Brightness/Contrast
Brightness
Contrast
Auto Adjust
Input Source
Scan Sources
DVI-D
support.dell.com/support/edocs/monitors/u3011/en/ug/operate.htm
Use this menu to activate Brightness/Contrast adjustment.
Brightness adjusts the luminance of the backlight.
Touch the button to increase brightness and touch the
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Touch the button to increase contrast and touch the
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with you
particular setup.
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monito
by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
NOTE: In most cases, Auto Adjust produces the best image for your configuration. Auto Adjust option is only available when you are using t
analog (VGA) connector.
Use the Input Source menu to select between different video signals that may be connected to your monitor.
Touch the button to select the Scan Sources, the monitor will auto detect either VGA input or DVI-D input or DislpayPort input or HDMI
input or Component video input.
Select DVI-D input when you are using the Digital (DVI) connector. Touch the
Description
button to decrease brightness (min 0 ~ max 100).
button to decrease contrast (min 0 ~ max 100).
button to select the DVI input source.
3/14