9/17/12
Connecting the black DisplayPort cable and the USB uplink cable
NOTE:
The graphics are used for the purpose of illustration only. Appearance of the computer may vary.
After you have completed connecting the DVI/VGA/DisplayPort cable, follow the procedure below to complete your monitor setup:
1. Plug the power cables for your computer and monitor into a nearby outlet.
2. Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
3. Use the cable slot on the monitor stand to organize the cables.
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See
cables as shown above.
Attaching the Soundbar
support.dell.com/support/edocs/monitors/u3011/en/ug/setup.htm
Documentation
(Optional)
Solving Problems.
for cable attachment,) use the cable management slot to organize all
Connecting Your Monitor
2/4