Diagnostic Set-Up; Figure 4-10 Diagnostic Set-Up Screen - Planar ELT320 Installation And User Manual

EL 1320 Installation and Users Guide
Diagnostic Set-Up
ELT320 V1.0
I DIAGNOSTIC SET -UP
Feature
Current Setting
Saved Settings
disabled
disabled
disabled
Host External Loopback
Printer External Loopback
Power-Up Test
disabled
disabled
disabled
Run Tests
Run Screen Tests
Repeat Tests
Use up/down arrow keys to select feature,
righVleft arrow keys to change current setting.
To return to the Set-Up Directory, press SELECT key.
Figure 4-10 Diagnostic Set-ilp screen
This screen is for use by service peruonnel. Most diagnostics require a special
loopback connector.
The tests check many parts of the terminal. If the terminal fails a test an error
message appears on the screen.