Table of Contents
Advertisement
PLANAR
Table 3-8 continued (The Status Une Fields)
5.
Printer: Ready
The printer can receive data for printing.
Printer: Not Ready
The printer is not ready to receive data for
printing (off-line).
The printer is off or not connected to the EL T320
tenninal.
Printer: None
The EL T320 is in auto print mode. The tenninal
sends the current display line to the printer
when the cursor moves to the next line.
Printer: Auto print
Printer: Controller
The ELT320 te1lIlina1 is in printer controller
mode. You cannot select this mode from the
te1lIlinal. The host system selects printer
controller mode.
6.
The modem is ready to send or receive data.
The modem sends the data set ready signal
(DSR) to indicate the modem is ready.
Modem:
DSR
The modem is not ready to send or receive data
from the tenninal. field 6 is blank, unless the
Modem Control feature in the Communications
Set-Up screen is set to "mode 1" or "mode 2".
Modem: No DSR
20
Advertisement
Table of Contents
