Table of Contents
Advertisement
EL 1320 Installatiol11 and Users Guide
Table 4-8 continued (The Local f.diting Set-up Screen Features)
Detennines whether the EL T320 can send
all selected areas on the page, or only the
selected area with the cursor. This mode
only works when selected area Transfer
Mode is set to "Selected"
Multiple Area
Transfer Mode
multiple
When you press ENTER, the EL T320 sends
all selected areas on the current page.
When you press ENTER, the ELT320 sends
only the selected area containing the
cursor.
single
Lets you send characters
a line at a time to
the host system.
Line Transmit
Mode
disabled
When you press ENTER, the ELT320 sends
a full or partial page. The size of the page
depends on the next two features.
When you press ENTER, the ELT320 sends
only a line of eligible characters.
enabled
Transfer
Termination Mode
Note:
When you enable LiIle Transmit Mode, the Return
key works like the ENTER key.
When line Transmit Mode is disabled, this
feature determines whether the EL T320
sends a partial page or the scrolling region.
enabled
When you press ENTER, the EL T320 sends
the scrolling region.
disabled
When you press ENTER, the EL T320 sends
a block based on the setting of Vf131
Transmit Mode.
Advertisement
Table of Contents
