Planar ELT320 Installation And User Manual page 47

Flat panel terminal
Table of Contents

Advertisement

EL 1320
Installation
and Users Guide
Table 4-4 continued (The CoD1:lnunications Set-up Screen Features)
Function
Settings
Feature
Sets up the terminal to work with
different types of moderns.
Modem Control
Modem control pins on the RS-232
connector are not used.
disabled
Selects fun modem control and is VT220
compatible.
mode-l
Selects partial modem control for CCITf
V.25 compatible modems. Supports
modems with autodial, auto-originate,
and auto-answer features.
mode-2
Disconnect Delay
Selects the time allowed for the EL T320
to disconnect from a communication
line. The EL T320 disconnects when it no
longer detects the receive line signal
detection (RLSD) signal. Modem Control
must be on mode lor mode 2.
Selects a 2 second delay.
Selects a 60 millisecond delay.
2s
60ms
Turns this feature off.
no disconnect
Selects whether or not to send the
characters you type directly to page
memory.
Local Echo
disabled
enabled
Communication Port
Sends keyboard data to the host system.
The host decides whether or not to send
the data to the page memory.
Sends keyboard data to both the host
and page memory.
Selects which cable connector is used to
connect to the host system
Selects the 9 pin RS-232 connector.
RS-232
RS-423
Selects the 6 pin RS-423 connector.

Advertisement

Table of Contents
loading

Table of Contents