A Guide To Set-Up Features - Planar ELT320 Installation And User Manual

EL T320 Installation and Users Guide
The ELT320 has ten set-up screens that display the terminal's operating features.
You can display, check and change these settings from the keyboard. The terminal
has three groups of set-up parameters: the factory default settings stored in the
terminal's EPROM; the saved setting stored in nonvolatile memory; and the current
setting stored in the terminal's RAM.
A Guide to Set-Up Features
The following chapter directory lists all the ELT320 set-up screens and their
features:
p .25 GENERAL SET -UP Online/local
Terminal Mode
Device Attribute Response
Character Set Mode
User Pref. Character Set
lock User-Defined Keys
User Features lock
SET-UP DIRECTORY .P.21
GENERAL SET -UP
DISPLAY SET -UP
COMMUNICATIONS SET-UP
PRINTER SET -UP
KEYBOARD SET -UP
USER-DEFINED SET -UP
LOCAL EDITING
TAB SET -UP
DIAGNOSTIC SET -UP p .28
Clear Display
Clear Communications
Reset Terminal
Save Current Settings
Recall Saved Settings
Recall Factory-Default Settings
Set-Up Language
Note: Use the arrow keys to select desired
action, then press ENTER key.
To move among screens, you can press the
NEXT SCREEN and PREV SCREEN keys.
To leave Set-Up, press Set-Up key.
DISPLA y SET -UP Screen Saver
Scrolling
Display Background
Column Mode
Page Arrangement
Horizontal Coupling
Vertical Coupling
Page Coupling
Status Display
Text Cursor
Cursor Style
Cursor Blink
Control Representation
New Line Mode
Auto Wrap