Table of Contents
Advertisement
PLANAR
Screen
Title
SET-UP
DIREcrORY
ELT320 Vl.0
The screen title displays the set-up screen name, the model number of the
tenninal, and the firnlware version.
.
SET -UP Directory Features
The left half of the Set-Up Directory lis~ the remaining set-up screens. The right
half of the screen lis~ some actions you can perform from this screen.
SET -UP Directions
The Set-Up directions tell you how to move the cursor to select features and
change current settings.
Status Line
The ELT320 uses the last line on the screen Oine 25) to display a status line for the
terminal in reverse video. You can select when to display the status line. See the
Status Line section at the end of Chapter 3.
Set-Up Cursor
Set-Up uses a spedal cursor that highlights a screen entry or field in reverse video.
When you enter Set-Up, the cursor highlights the GENERAL SET-UP field in the
Set-Up Directory.
Action and parameter fields
The Set-Up screens have action and parameter fields.
When you select the highlighted action field by pressing the Enter key, the
terminal immediately performs that action. The terminal displays the "Done"
message to let you know if the action was successful.
Most of the parameter fields have a three column format:
Feature
Current Setting
Saved setting
The Feature column lists each feature you can set from that screen.
The Current Setting column shows the setting in effect for that feature.
The Saved Setting column shows the setting stored in the tenninal's nonvolatile
memory. You can use the up/ down arrow keys to move the highlighting cursor to
any feature and use the <3 , [:>0 and the Enter keys to change the current setting of
a feature.
Advertisement
Table of Contents
