Advertisement
4. IR receiver sensor
5. IR extension port
Rear Panel
6
2
6
1. AC power input: 100-240V
2. RS-232 communication port
3. Ethernet port
4. Main dip switches
5. DVI output ports
6. DVI input ports
Remote Control
1. Power: Turn the unit on/off
2. Source select: Only buttons 1 & 2 are used in this area,
which are used in conjunction with the "Fn" button
3. Input: Press 1-8 to select the desired input
4. Output: Press 1-8 to select the desired output
To use the remote control to switch channels, first
select the input you require and then select the
output/outputs you would like it to display on. Repeat
this for multiple pictures on multiple screens. The
channel switching takes approximately 2 seconds.
Fn + Source Sel 1 = Escape system lock
Fn + Source Sel 2 = System lock. The remote control
becomes inactive except for the above command.
EDID
The Matrix has built in EDID profiles to cover the most widely used resolutions. The native
resolution is 1680x1050p @ 60Hz (16:9)
Other supported resolutions:
1920x1080p@60Hz
1600x1200p@60Hz
1440x900p@60Hz
1360x765p@60Hz
1280x1024p@60Hz, 75Hz
1280x960p@60Hz
1280x800p@60Hz
5
1152x870p@75Hz
1152x864p@75Hz
1024x768p@60Hz, 70Hz, 75Hz, 87Hz
800x600p@56Hz, 60Hz, 70Hz, 72Hz, 75Hz
720x480p@70Hz
640x480p@60Hz, 67Hz, 72Hz, 75Hz
6
1
6
3
4
1
2
3
4
Advertisement
