How To Copy The Program Operation Time; How To Check The Program Operation Time; How To Change The Program Operation Time; How To Clear The Program Operation - Toshiba R410A Service Manual

7. How to copy the program operation time

When setting the program operation, already set program can be copied and set to
the other day of the week.
<Example: To copy the operation contents of Monday to Tuesday>
1. Push CHECK button in normal display.
2. Push button and put the operation reserve
DAY
indication on the day of the week of which the
program operation is already set.
(Monday in the example)
3. Push button.
PROGRAM
Present day of the week indication and Operation
reserve indication flash.
4. Push button and put the present day of the
DAY
week indication on the day of the week to be copied.
(Tuesday in the example) (For continuous copying,
push button, and then push
DAY
SET
5. Push button. The operation reserve indication
PROGRAM
the week.

8. How to check the program operation time

1
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
2
WEEKLY TIMER
PROGRAM DAY SET CANCEL
HH MM
CLEAR CHECK
1,
2
3
CAUTION
1. While reserve indication is
flashing, the display does not
change even if other buttons are
pushed than , , and
DAY CHECK
button.
PROGRAM
2. If 30 seconds have passed while
the reserve indication is flashing
without pushing , or
DAY CHECK
button, the display returns
PROGRAM
3
automatically to the original
display. (Normal display)
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
WEEKLY TIMER
PROGRAM DAY SET CANCEL
HH MM CLEAR CHECK
button.)
goes on under the copied day of
Push button.
CHECK
<Example: Case to check the program
operation time of Wednesday in Monday>
• The operation reserve indication flashes in
the normal display status.
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
Push button and put the operation
DAY
reserve indication on the day of the week
to be checked.
• Every pushing button, the operation
DAY
reserve indication flashes and the contents
of program operation time of the day of the
week on which the operation reserve
indication has been put on is displayed.
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
Push button.
CHECK
• It turns to be normal indication.

9. How to change the program operation time

1. Push button in the normal display
PROGRAM
status.
2. Select the required day reserve mark
by pushing button.
DAY
3. Push button.
SET
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3
9
WEEKLY TIMER
PROGRAM DAY SET CANCEL
HH MM
CLEAR CHECK
11
10

10. How to clear the program operation

• Clear of the day of the week
1) Push button.
PROGRAM
2) Push button and select the
DAY
reserve mark to be cancelled.
3) Push button. The program time
CLEAR
disappears.
4) Push button. The operation
PROGRAM
reserve indication disappears.
• Clear of a part of the program
1) Push button.
PROGRAM
2) Push button and select the
DAY
reserve mark on a to be cancelled.
3) Push button.
SET
4) Push button again to flash ON
SET
or OFF time of the program to be
cancelled.
5) Push button.
CLEAR
Then, a part of the program has been
cancelled. At the same time, the
remained programs are automatically
arranged.
6) Push button.
PROGRAM
4. Each push button, the flashing
SET
part changes in the following figure. Put
the indication on the time to be changed.
5. Using / buttons, change the time.
HH MM
6. Push button.
SET
7. Push button. Then the change
PROGRAM
operation has completed.
SuMoTuWeTh Fr Sa
PROGRAM1
ERROR
PROGRAM2
PROGRAM3

11. How to set up the holiday

• The operation reserve day can be
cancelled by setting up the holiday.
1) Push button. The holiday setup
CANCEL
mark flashes.
2) Push button and select the
DAY
holiday setup mark on the day
which the holiday is set.
3) Push button. The flashing
SET
holiday setup indication changes
on. ( )
• Clearance of [HOLIDAY] setup
1) Push button.
CANCEL
2) Push button and select the
DAY
holiday setup mark on the day to
which the holiday is cancelled.
3) Push button. The holiday setup
SET
mark disappears and the operation
reserve mark appears.
• Explanation of operation
The cancel setting day is temporarily
canceled, and from the next day, the
cancel setup mark disappears and the
operation reserve mark appears.
CAUTION
• For the day which does not set timer, the
cancellation cannot be set.