Standard Features - Motorola MINITOR VI RLN6506 Series Manual

STANDARD FEATURES

External Antenna
The external antenna input jack (BNC connector) is located on the rear of the Amplifier Charger housing. An
external antenna must be attached to the Amplifier Charger for maximal reception.
Audio Amplifier
The Amplifier Charger contains a 2.5-watt audio amplifier and speaker. When a pager is placed in the
Amplifier Charger, the audio is routed to the Amplifier Charger speaker rather than to the pager speaker.
External Speaker Jack
An external speaker jack, located on the rear of the Amplifier Charger housing, allows the user to attach an
external speaker. When an external speaker is connected, audio will be routed to that speaker rather than to
the Amplifier Charger internal speaker. The minimum speaker impedance is 4 ohms.
Relay
The Amplifier Charger includes a relay that is energized whenever an alert is received, and a 6-pin DIN
accessory connector is located on the rear of the unit. The 6-pin mating plug for these models may be wired
to provide the following functions:
Remote Speaker Audio (Pins 1 and 6)
•
An external 4-ohm speaker may be connected to the Amplifier Charger via pin 1 (audio) and pin 6 (ground
return) of the plug, to provide both remote speaker audio and internal speaker audio at the same time.
Relay Dry Contact Closure (Pins 2 and 3)
•
When the accessory relay is energized, its contacts close and present a short across pins 2 and 3 of the
connector. The relay contacts are rated for 10 watts maximum at 28 VDC/AC
5
. Within the limits of the
RMS
English