Introduction; Safety Notes - PCE Health and Fitness PCE-313A Manual

1

Introduction

Thank you for purchasing a PCE-313A from PCE Instruments.
The PCE-313A humidity and temperature data logger has been designed for professional use, for
instance in the air conditioning sector. It can measure the relative humidity as well as the ambient
temperature. This device can be connected to K-type thermocouples. The sampling rate for real-time
measurements can be adjusted and you can save your readings either to the internal memory of this
instrument to an SD memory card with a capacity of 1 ... 16 GB. The values saved on the SD card as an
xls file can be transferred to a PC for further analysis. The PCE-313A can work independently, without the
user being present during the measurement as it can be programmed via the keypad in advance. For
long-term measurements we recommend you to use the PCE-313A with the optional mains adaptor.
2

Safety notes

Please read this manual carefully and completely before you use the device for the first time. The device
may only be used by qualified personnel and repaired by PCE Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual.
- The device may only be used within the approved temperature range.
- The case should only be opened by qualified personnel of PCE Instruments.
- The instrument should never be placed with the user interface facing an object (e.g. keyboard side on a
table).
- You must not make any technical changes to the device.
- The appliance should only be cleaned with a damp cloth / use only pH-neutral cleaner, no abrasives or
solvents.
This manual is published by PCE Instruments without any guarantee.
We expressly point to our general guarantee terms which can be found in our general terms of business.
If you have any questions please contact PCE Instruments.
Manual
3