Understanding The Error Codes; Specifications - Insignia NS-TWM16WH9 User Manual

PROBLEM
Clothes are
staining
Clothes are
wrinkling

Understanding the error codes

Your washer is equipped with an automatic error-monitoring system to
detect and diagnose problems at an early stage.
ERROR
POSSIBLE CAUSE
CODE
E1 Your washer takes more than
30 minutes to fill with water.
After water finishes entering
your washer, the water level has
not changed in five minutes.
E2 The unit takes more than 10
minutes to drain.
E3 The lid is open.
The washer is not level.
E4 Your washer is out of balance
more than three times in spin
operation.

Specifications

Dimensions
(H × W × D)
Weight
Power
Current draw
Volume of inner tub
Pulsator type
Display type
Display color
Motor
• Remove your clothes from the washer as soon as the cycle is
complete.
• Always wash dark colors separately from light colors and
whites.
• Never wash heavily-soiled clothes with lightly-soiled clothes.
• Remove your clothes from the washer as soon as the cycle is
complete.
• Do not pack your clothes tightly into the washer. The lid should
close easily.
• Make sure that the water hoses are connected to the correct
water inlets.
36.6 in. x 20.3 in. x 20.7 in
(93 cm × 51.5 cm × 52.5 cm)
75 lbs. (34 kg)
120 V~/60 Hz
6 A
1.6 Cu. Ft.
Impeller
LED
Blue
Series
www.insigniaproducts.com
1.6 Cu. Ft. Portable Top-Load Washer
SOLUTION
SOLUTIONS
• Make sure that the lid is not open.
• Make sure that water is not leaking.
See No water or not enough water on
page 33.
• Contact Insignia Customer Care.
• See Washer does not drain or spin on
page 34.
• Close the lid.
• Level the washer. See "Step 6: Level
your washer" on page 25.
• See Washer vibrates or is too noisy on
page 33.
• Contact Insignia Customer Care.
35