Control Panel - Insignia NS-TWM16WH9 User Manual

Control panel

# ITEM
1 Procedure button
2 Digital display
3 Delay button
4 Load Size button
5 Temp button
12
Press to select the steps included in the washing cycle. If
the LED next to the step is lit, the step will be included in
the washing cycle. The step will not be included if the
LED is not lit.
The initial display is the total time for the cycle you select.
While your washer is running, the display shows the cycle
process and time remaining in the cycle.
Note: The time shown is an estimate based on normal
operating conditions. External factors (such as the load
size, room temperature, incoming water temperature,
and water pressure) can affect actual time.
If you set a delay time for the start of the cycle, the
display shows the time when the cycle will start.
Press to select a time when you want the cycle to begin.
You can set the time up to 24 hours in advance in
one-hour increments. The display shows the time when
the cycle will start. For more information, see Step 5:
(Optional) Set a delayed start time on page 29.
Press to set the load size. This setting determines how
much water is used throughout the wash cycle.
Press to select the washing water temperature. The LED
indicator lights with the selected temperature.
The rinse water temperature is always cold. If you select
warm or hot for your wash cycle, the LED indicator will
change to cold during the rinse cycle.
www.insigniaproducts.com
DESCRIPTION
NS-TWM16WH9