HSAC3[16]instructions 9/6/16 09:18 Page 1 HSAC3 Air Curtain Operating Instructions 3kW Air Curtain with ‘half power’ setting and air circulation mode IMPORTANT SAFEGUARDS WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED. PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE.
• DO NOT operate the heat curtain in premises with the air-relief nozzle (3) as the directed flow. the relative humidity >80%. The HSAC3 also has a cool air circulation function in addition to ‘full’ and • The heater MUST be earthed when installed. ’half’ power heating functions.
Page 3
Tighten screws to hold the unit at the required angle. The HSAC3 provides heated air in full and half power options as well as See figure 2, and figure 3, above cool air recirculation, and is operated with the control module locate on the underside of the body, There are 3 switches –...
Dimensions with bracket mm (WxHxD) 589x150x170 If you are in any doubt about the installation, operation or maintenance of this unit please contact the Heatstore Technical team on 0117 923 5375. Net weight nett/gross 4.7/5.3 ON E Y EA R Waste electrical products should not be disposed of with household waste.
Need help?
Do you have a question about the HSAC3 and is the answer not in the manual?
Questions and answers