Multi Charger; Handset; Battery Low Indication - Topcom BUTLER 1600 User Manual

Topcom Butler 1600Twin/Triple/Quattro
3.2

Multi charger

• Connect the AC adaptor to the electric socket
3.3

Handset

• Insert 2 rechargeable batteries (AAA) inside the battery compartment of the handset.
+
-
Put the handset on the base unit. The red Charge LED
on the base.
Charge the handset for a period of 24 hours before using the handset for the first time. To
extend the battery life time, discharge the batteries completely from time to time. As soon as
the handset emits a warning tone or when the battery icon
on the base unit for charging.
4

Battery low indication

When the battery is empty, the handset no longer carries out operations. When a battery is
completely empty and you have put the handset on the base unit for a short period of time,
the Battery symbol will appear to be fully charged but this is actually not the case. The battery
capacity will decrease rapidly. We advise you to put the handset on the base unit for 12 hrs
so that it can be recharged completely.
• Full battery
• Empty battery
When you are in the middle of a conversation and the battery is almost empty, the handset
will emit a warning signal. Place the handset on the base unit to charge.
8
-
+
will lit as long as the handset is
is empty, you have to put it back
Topcom Butler 1600/Twin/Triple/Quattro