Maintenance - ABB Arc Guard System TVOC-2 Installation And Maintenance Manual

42 ABB ARC GUARD SYSTEM™ – T VOC-2 INSTALL ATION AND MAINTENANCE GUIDE
Revision information
Revision Information displays connected modules to the
Arc Guard System™ and latest revision of each module.
This includes, software, hardware, and ID number.
This information is required when contacting ABB for
support.
To view revision information about the module follow the
steps below:
1. From Start window, press Menu.
2. Select 3. Configuration, press OK.
3. Select 3.3 Revision information, press OK.
4. The 3.3 Revision information displays connected
modules.
3.3 Revision Information
3.3.1 Arc Monitor
3.3.2 HMI
3.3.3 Ext.Module
Back
Figure 51
Revision information
5. To view Revision Information.
6. Select chosen module, press OK.
7. The 3.3.1 the module, display:
• 3.3.1 Arc Monitor (in this case)
• The modules software
• The modules hardware
• The modules ID number
3.3.1 Arc Monitor
SW 01.00.00
HW xx CPDLD xx.yy.zz
ID xxxxxx
Back
Figure 52
Arc monitor
5.4.4
If you understand the current menu language, follow the
steps to set the language of the system menu:
In the Main menu:
1.
2.
5.4.5
Use this procedure to set the time and date in the system.
In the Set Time menu do the steps below:
1.
2.
3.
4.
5.
OK
5.4.6
1SFC170011M0201
Making the factory reset will force the HMI to start the
Start-Up sequence.
Press and hold the 2 soft keys in the middle for more
then 10 s.
Figure 53
Factory reset
This will force the HMI to start the Start-Up sequence.
1SFC170011M0201
Language
Select 4 Language, press OK.
Select the language to use, press OK.
INFORMATION
If you do not understand the menu language,
use factory reset.
Set Time and Date
Scroll to correct hour, press OK.
Scroll to correct minutes, press OK.
Scroll to correct day, press OK.
Scroll to correct month, press OK.
Scroll to correct year, press OK to return to Start
window.
Factory reset
Arc Guard System TVOC-2
Power Trip Error
1SFC170011M0201