Human Machine - ABB Arc Guard System TVOC-2 Installation And Maintenance Manual

18 ABB ARC GUARD SYSTEM™ – T VOC-2 INSTALL ATION AND MAINTENANCE GUIDE
4.1 Introduction
This chapter describes how to install the Arc Monitor and
set up the system. Also in this chapter are examples in
placing detectors and general information concerning the
products.
Installation of Arc Monitor is performed in steps. After
finishing one step you proceed to the next one. The
sequence is mandatory.
INFORMATION
The Arc Monitor has 10 detector inputs. If your
system needs more inputs then you will need
to use additional extension modules.
4.2 Installation procedure
WARNING
The reader should have knowledge and follow
the applicable safety laws and standards as
well as local safety instructions.
Installation procedure consists of the following five steps:
• Getting started
• Mounting
• Connecting electrical connections
• Configuration
• Testing and verification
Tools required
To mount the Arc Monitor the following tools are required:
• Screwdriver, 2.5 x 0.6 mm (0.98 x 0.23 inch)
• Phillips screwdriver 4.3/2
• Drill 5 mm (0.196 inch), in case of wall mounting.
4.2.1 Getting started
This section describes instructions how to receive and
check the Arc Monitor.
Do the following steps:
Receiving and checking
1. Turn the package with the correct side up.
2. Remove the transport casing.
3. Visually inspect the Arc Monitor.
4. Check that all items are included, according to the
delivery document.
List of contents
Check the contents in this package as follow:
• Arc Monitor
• Connection cable 3 meter (118 inch) for external Human
Machine Interface, HMI
• Plastic nut for mounting external HMI
• Sealing for mounting external HMI
• Label for covering HMI contact on Arc Monitor, (only if
external HMI is used)
• User manual on CD
• Quick installation guide
INFORMATION
This package is a basic start kit. If you need
more according for your system needs then
contact your local supplier.
Intermediate storage
Until the Arc Monitor is mounted it should be stored in its
original package.