Maintenance - ABB Arc Guard System TVOC-2 Installation And Maintenance Manual

40 ABB ARC GUARD SYSTEM™ – T VOC-2 INSTALL ATION AND MAINTENANCE GUIDE
System Status
The system status displays the status of the system after
a diagnosis is made.
The window displays the following:
• System OK
• Diagnostics performed
• Time and Date
2.1 System status
System OK
Diagnostics performed
15:09 28-Feb-2009
Figure 44
System status
Perform Diagnostics
In addition to the systems automatic diagnostic, it is
the possible to do a manual one. To perform a manual
diagnostic do the following steps:
1. From Start window, press Menu
2. Select 2. Diagnostics and press OK
3. In the 2. Diagnostics menu, select 2.2 Perform
Diagnostics
2.2 Perform Diagnostic
Press OK for
diagnostic test now.
B a k c
Figure 45
Preform diagnostics
4. Press OK for diagnostic test now.
5. The window displays Performing diagnostics tests.
If the system is OK, the window will display:
•
•
•
•
OK
Figure 46
System status
1SFC170011M0201
6.
If the system is not OK, a notification window appears
displaying following:
•
•
•
Figure 47
O K
System Error
1.
2.
1SFC170011M0201
2.1 System status.
System OK.
Diagnostics performed.
Time and Date.
2.1 System status
System OK
Diagnostics performed
15:09 28-Feb-2009
Press OK to return to Start window.
System Error
Error code.
Time and Date.
System Error
See TVOC-2 manual
134 0 0 0 0 0
14:02 3-Feb-2009
Press Menu to return to Start window.
The error is stored in the Error Log.
INFORMATION
See: "Error Log" on page 50.
OK
1SFC170011M0201
Menu
1SFC170011M0201