Maintenance - ABB Arc Guard System TVOC-2 Installation And Maintenance Manual

ABB ARC GUARD SYSTEM™ – T VOC-2 INSTALL ATION AND MAINTENANCE GUIDE
Error Log
In the Error Log are the nine latest system error events
stored, the oldest will be overwritten.
INFORMATION
See: "Error Log" on page 50.
5.4.3 Configuration
Configuration consists of three subcategories as follows:
• View Modules.
• View DIP switches.
• Revision Information.
View Modules
View Modules displays which modules are connected to
the Arc Monitor. To see the View Modules do the following
steps:
1. From Start window, press Menu.
2. Select 3. Configuration, press OK.
3. Select 3.1 View Modules, press OK.
3.1 View Modules
HMI-int.
HMI-ext.
X2
Back
Figure 48
View models
This figure shows the window, 3.1 View Modules, with the
modules connected to the Arc Monitor.
X3
CSU 21
CSU 22
1SFC170011M0201
View DIP switches
3.2 View DIP switches display information how the
configuration are made to the DIP switches. To see the
View DIP switches do the following steps:
1. From Start window, press Menu.
2. Select 3. Configuration, press OK.
3. Select 3.2 View DIP Switch, press OK.
3.2 View DIP
10 10 01 00
CSU 21 active
Back
Figure 49
View DIP
The 3.2 View DIP menu displays:
• 3.2 View DIP.
• DIP switches settings.
• Status line.
The figure below is an example which describes how to
read the DIP switches settings in HMI.
3.2 View DIP
10 10 01 00
CSU 21 active
Back
Figure 50
DIP switch settings in the HMI
The eight numbers reflect the 8 DIP switches.
The two first numbers 1 0, in line are the CSU connections
on the DIP switch.
Number 1 in number 10 shows that the setting is ON.
This example shows that the CSU connection 21 is
connected. CSU 22 is not in use.
4. Press arrow to scroll forward/backward, see all DIP
switches.
5. Press Back to return to 3. Configuration.
6. Press Back to return to Start window.
41
1SFC170011M0201
10 10 01 00
3 4 5 6 7 8
1 2
1SFC170011M0201