Picture And Sound Fade -In/ Out - Sankyo SOUND XL-300S Instruction Manual

~ ~
PICTURE AND SOUND FADE -IN / OUT
Sound fading
Picture fading
• Turn the sound level con-
trol in the "MAN" range .
Turning clockwise reduces the
sound level and vice versa.
Monitor the fading condition
through the headset.
1. Set the aperture control
to "AUTO" and read the
f-stop on the aperture scale.
2. Turn the aperture control
in the "MAN" range to ad-
just the aperture indicator
needle to the value previ-
ously noted .
3 . Start fading out by turning the aperture control counter-
clockwise. The picture fades out completely when the indi -
cator needle enters the fade-out mark.
4 . To fade in, turn the aperture control clockwise from the
faded -out state until the indicator needle returns to the f-stop
corresponding to the subject.
After picture fading, be sure to return the aperture control
to "AUTO".
REMOTE CONTROL Fl LMING
Remote control filming is possible with an optional remote
control or the remote control microphone provided.
1. Set the camera's power
switch to "OFF".
2. Set the remote control
switch to "OFF".
3. Plug the remote control
into the "REM" jack.
When using the remote con -
trol microphone , connect t his
to the "MIC" and "REM"
jacks .
19