Sankyo SOUND XL-300S Instruction Manual page 11

To un load the film
To remove t he cartridge, lift the rear side.
Avo id removing the cartridge before the end of the film is
reached since 15
cm
(6 "} of the film will become fogged.
Slack may also develop in the f ilm .
Slack film hanging from the cartridge may prevent proper
loading. If this happe ns, tu rn the core on t he back center of the
cartridge in t he take -up direc t ion (clockwise) to remove the slack.
I
When the fi lm jams
I
Jamming
Cause
Fi lm jams at beginning.
Improper loading of cartr idge.
Film jams in middle of roll.
Insufficient batte ry power.
,
7