Operation Of Record - Vestax QFO Owner's Manual

OPERATION OF RECORD

①Place a record on the slip mat.
②Turn power switch to "ON" position.
③Remove stylus protector if applicable.
④Select the input select switch to "phono".
⑤Select appropriate rotation speed. (33/45rpm)
⑥Push Start/Stop Switch to start rotation.
⑦Carefully place tonearm on the record.
⑧Adjust the each level volume.
⑨Replace tonearm to rest position after play has finished.
⑩Press Start/Stop Switch to stop rotation.
⑪Turn power switch to "OFF" position.
MEMO
If you select "PHONO" for both program channels,
reproduced sound of record is
assigned to each channel. For example, if you squeeze
EQ of PGM1 and fix EQ of PGM
at the center level and at the same time using Cross
Fader with Input Level Volume of
both program channels risen, it enables the
mixing/changing of EQ adjusted reproduced
sound and non-adjusted reproduced sound.
NOTE
If the power switch is turned off without pressing the
START/STOP Switch, the electric brake will not function.
PLAYING EP RECORDS
Fit the EP adaptor over the center spindle and follow the
same playing instructions as written above.
All manuals and user guides at all-guides.com
-13-
POWER SWITCH
TRIM
MIN MAX
HI
EQ
-12dB +12dB
LOW
Input select switch
to "PHONO"
PGM 1
LEVEL
10
9
8
7
6
5
4
3
2
1
0
POWER
MASTER
LEVEL
MIN MAX
図a
MIN MAX
HI
EQ
-12dB +12dB
LOW
-24dB +12dB
PHONO
LINE 1
図b