Slip mat
Place the slip mat on the platter. Then place a record on
top of the slip mat. By using a slip mat, it becomes
possible to stop a record board by hand during rotation of
a platter or to make it reverse. Moreover, if an optional
slip-sheet is set and used, it will take effect more.
Cartridge Installation
(1)Make sure that you follow the instructions included with
your cartridge.
(2)Connect the lead wires to the respective terminals.
Industry standard cartridges come with color-coded
wires. Make sure that you match these colors correctly.
Red (R+) Right Channel+ Green (R-) Right Channel -
White (L-) Left Channel+ Blue (L-) Left Channel -
NOTE
If using a lightweight cartridge, we suggest the use of
the shell weight enclosed.
(3)The overhang of your cartridge needs to be adjusted to
best suit the A.S.T.S tone arm. For best tracking and
stylus pressure a distance of 50mm (as shown) should
be set.
NOTE
To avoid premature damage to the stylus take care to
avoid touching it during any adjustment(s).
(4)Insert the head shell into the front part of the tone arm.
Turn the looking ring in the direction shown below until
the head shell is firmly fixed in place.
All manuals and user guides at all-guides.com
-10-
NUT
HEADSHELL
(OPTION)
SHELL WEIGHT
(OPTION)
CARTRIDGE
STYLUS
SCREW
50mm
Top:Record disc side(Printed side)
Bottom:Slip surface side
LEAD WIRE