Viking Prosfessional Series Installation Manual page 9

Installation Procedure
(continued)
3
Remove hinge trim screws. Take off hinge trim.
5
Lift door up and out. Repeat for all doors.
7
Unscrew pallet screws from side of oven.
*Note: Check local code to see which wiring option should be used when grounding the unit.
16
All manuals and user guides at all-guides.com
4
Close until pins stop door.
6
Remove racks.
8a
White
Neutral
Green
Red
Black
Wiring option 1*
(connect the white and green to the incoming neutral)
Installation Procedure
(continued)
8b
Green
White
Neutral
Red
Black
Wiring option 2*
(connect the white to the incoming neutral,
attach green to grounded junction box)
9
Lift oven into position.
11
Attach screws to the side of the framing.
Note: 2 screws for single ovens,
4 screws for double ovens (screws not included)
*Note: Check local code to see which wiring option should be used when grounding the unit.
17
8c
White
Neutral
Green
Red
Black
Wiring option 3*
(connect the white to the incoming neutral,
attach green to suitable ground)
10
Push oven straight in.
12
Replace racks.