Siemens RDG100 Basic Documentation page 63

RDG140 / RDG160
Power supply
Outputs
Inputs
Operational data, all
types
Siemens
Building Technologies
Operating voltage
Frequency
Power consumption
Fan control
Q1, Q2, Q3-N (RDG140)
Y50-G0 (RDG160)
Control outputs Y10-G0 / Y20-G0
Resolution
Current
Multifunctional inputs
X1-M / X2-M
Temperature sensor input
Type
Temperature range
Cable length
Digital input
Operating action
Contact sensing
Parallel connection of several
thermostats for one switch
Insulation against mains
D1-GND
Operating action
Contact sensing
Parallel connection of several
thermostats for one switch
Insulation against mains
Function input:
External temperature sensor, changeover sensor,
operating mode switchover contact, dewpoint
monitor contact, enable electrical heater contact,
fault contact
Switching differential, adjustable
Heating mode (P30)
Cooling mode (P31)
Setpoint setting and setpoint range
Comfort mode
Economy mode
Protection
Multifunctional inputs X1 / X2 / D1
Input X1
Input X2
Input D1
RDG100, RDG100T, RDG110, RDG140, RDG160
Technical data
(P08)
(P11-P12)
(P65-P66)
Basic Documentation
SELV AC 24 V  20%
50/60 Hz
Max. 2 VA
AC 230 V, max. 5(4) A
SELV DC 0...10 V
Max. ± 1mA
SELV DC 0...10 V
39 mV
Max.  1 mA
QAH11.1 (NTC)
0...49 °C
Max. 80 m
Selectable (NO/NC)
DC 0...5 V, max. 5 mA
Max. 20 thermostats per
switch. Do not mix with D1!
3.75 kV, reinforced
insulation
Selectable (NO/NC)
SELV DC 6...15 V, 3...6 mA
Max. 20 thermostats per
switch.
Do not mix with X1 / X2!
3.75 kV, reinforced
insulation
Selectable
2 K (0.5...6 K)
1 K (0.5...6 K)
21 °C (5...40 °C)
15 °C/30 °C (OFF, 5...40
°C)
8 °C/OFF (OFF, 5...40
°C)
Selectable
Ext. temperature sensor
(P38=1)
Changeover sensor
(P40=2)
Operating mode switchover
(P42=3)
63 / 66
CE1P3181en
14 Dec 2011