All manuals and user guides at all-guides.com
8. Installation (AMD Duron / Athlon / Athlon XP - 462)
1) Install Clip Supports for Socket 462
Install the clip supports for socket 462 on the motherboard. Make sure to place A-type (blue : installed
near the lever) and B-type (white) supports at the appropriate location.
The installation should be done in the order of : bolts > small washers > motherboard > small washers >
clip supports (see below).
Small Washer
Motherboard
Small Washer
Bolt
2) Apply Thermal Grease
Clean off particles and residue and then spread the
included thermal grease thinly and evenly over the CPU
core that touches the FHS surface.
3) Insert Bolts
Insert the two bolts into the inner holes of the clip.
4) Place FHS
Set the FHS at the center of the CPU. Screw the
bolts in slightly, and then tighten them in an alternating
fashion until the clip supports are completely pressed
against the clip.
5) Supply Power (Connect FAN MATE 2)
◆
Please refer to FAN MATE 2 Installation and Usage on page 7.
The specifications of any product may change without prior notice to improve performance.
※
Clip Support B for Socket 462 (White)
Clip Support A for
Socket 462 (Blue)
Clip Support B for Socket 462 (White)
FHS
Cilp Support for
Socket 462
Lever
CPU
Thermal Grease
Bolt
Inner Hole
Clip
5