Acer B223PWL Service Manual page 8

1.3.1 Interface Connectors:
1.3.1.1 Power Adaptor and Connector:
The AC inlet connector shall be an IEC 320-C13 male power receptacle for connection to mains
power. The power cord shall be gray or black with length of 1.8m + 10cm/-0cm. The power cord type
is worldwide type.
1.3.1.2 Analog Connector, DVI Connector and Cable: The analog signal cable shall be Gray or black and
1.8m + 10cm/-0cm. The DVI signal cable shall be Gray or black and 1.8m + 10cm/-0cm.
A . D - S U B
B. DVI
PIN No.
1
2
3
4
5
6
7
8
9
10
11
12
All manuals and user guides at all-guides.com
PIN No. Description
1 Red Video
2 Green Video
3 Blue Video
4 Monitor ground
5 DDC-Return
6 Red Ground
7 Green Ground
8 Blue Ground
Description PIN No.
TMDS data 2-
TMDS data 2+
TMDS data2/4 Shield
NC
NC
DDC Clock
DDC Data
NC
TMDS data 1-
TMDS data 1+
TMDS data1/3 Shield
NC
PIN No. Description
9 +5 v
10 Logic Ground
11 Monitor ground
12 DDC-Serial Data
13 H-Sync.
14 V-Sync.
15 DDC-Serial Clock
Description
13 NC
14 +5V Power
15 GND(return for +5v,hsync,vsync)
16 Hot Plug Detect
17 TMDS data 0-
18 TMDS data 0+
19 TMDS data 0/5 Shield
20 NC
21 NC
22 TMDS Clock Shield
23 TMDS Clock +
24 DDC TMDS Clock-
6