Unscrew the two screws to remove the key board.
S5
S6
Lift to move the mainframe a little to tear up the tape and disconnect the FFC cable (main board to panel).
Disconnect the wires (power board to panel) as below picture to remove the MAINFRAME away from panel,
S7
Use a Philips-head screwdriver to unscrew six screws after turn it over.
Remove the SHIELD_AUDIO. Use a Hex-head screwdriver to unscrew the screws for VGA connector and
S8
DVI connector.
All manuals and user guides at all-guides.com
36