Table of Contents
Advertisement
Locate the key board cable and fix the cable on the specific position as the below picture remarked in red
S4
S4
circle.
Turn over the MAINFRAME. Use a Hex-head screwdriver to tighten four screws and use a Philips-head
S5
screwdriver to unscrew a screw for locking the VGA connector and DVI connector.
S6
Assemble the SHIELD_AUDIO.
Prepare a panel. Assemble panel and MAINFRAME. Put the MAINFRAME on the panel and connect the FFC
S7
cable (main board to panel). Stick the tape as below right picture.
S8
Connect the wires (power board to panel) as below picture.
All manuals and user guides at all-guides.com
32
Advertisement
Table of Contents
