Table of Contents
Advertisement
2.1 Key Definition:
1. Power LED
2. Power Switch
3.4.< / >
5.Menu/Enter
6.Auto adjust button/Exit
7.
/Exit:
2.2 Function Menu:
1). Display Function Menu while user press any function button.
2.3 Main OSD Menu:
2.3.1. OSD layout:
a. Display OSD menu when user press "MENU" button on front bezel.
b. Layout as following figure.
All manuals and user guides at all-guides.com
2. OSD Menu
Lights up to indicate the power is turned on.
Turn the power on or off.
Press < or > to navigate to the desired function, press Enter to select the function.
Press < or > to change the settings of the current function.
Activate the OSD menu when the OSD is off or activate / deactivate the
adjustment function when the OSD is on.
a. When the OSD menu is active, this button will act as the exit key (exit OSD
menu).
b. When the OSD menu is inactive, press this button for two seconds to activate
the Auto Adjustment function. The Auto Adjustment function is used to set the
HPos, VPos, Clock and Focus.
a. When the OSD menu is active, this button will act as the exit key (exit OSD
menu).
b. When the OSD menu is inactive, press this button to select scenario mode.
16
Advertisement
Table of Contents
