Using The Hand Strap - Panasonic FZ-G1 Series Operating Instructions - Reference Manual

Hand Strap
<Only for model with hand strap>
Hand Strap
Attaching the hand strap helps you stably hold the computer.
If the hand strap loosens, the computer may fall down.
n
Do not use the strap if it becomes worn or damaged.
n
Before using, check if the mounting clips and the screws have been firmly fixed.
n

Using the hand strap

1. When using the computer holding with hand, insert your hand to (A) part of the hand strap.
2. Fix the hand strap firmly so that the computer does not come off, and then turn it over.
3. Adjust the angle of the hand strap if it is necessary.
If the hand is not securely fixed to the hand strap, the computer may drop.
n
When the hand strap is too loose or too tight, you can adjust the hand strap according to the instructions below.
1. Remove (A) from the strap joint and next remove (B).
C AU TI O N
C AU TI O N
- 106 -