Preparation
Using the hand strap
A
Adjusting the hand strap
A
C
3
D
24
When using the computer holding with hand,
insert your hand to (A) part of the hand strap.
Fix the hand strap fi rmly so that the computer
does not come off, and then turn it over.
CAUTION
Adjust the fastening strength of hand strap as
B
below.
A Remove (A) from the strap joint and next
B Adjust the position (C).
C
CAUTION
E
When the hand strap is too loose or too tight,
you can adjust the hand strap according to
the instructions below.
If the hand is not securely fi xed to the hand
strap, the computer may drop.
remove (B).
Attach (D), then (E) to the joint.
Attach the hand strap fi rmly so that the strap
does not come off.
If the hand strap loosens, the computer may
fall down.
Do not use the strap if it becomes worn or
damaged.