Hand Strap (Fz-Vsta31) - Panasonic FZ-A3 Series Operating Instructions - Reference Manual

Tablet computer
Table of Contents

Advertisement

Supplementary items

Hand Strap (FZ-VSTA31)

Handling and maintenance
Take care as there is a risk of the unit dropping when the hand strap is loose.
Do not use the hand strap if it is worn out or damaged.
Your hand, hand strap, etc. may appear in the shooting range of the camera depending on the way you
hold or the direction of the hand strap. When shooting with the camera, adjust the position of the hand
strap so that the hand strap does not enter the shooting range of the camera.
For typical cleaning, wipe the hand strap with a soft, dry cloth.
If the hand strap becomes dirty, wet a soft cloth with water and wring it thoroughly before wiping the
hand strap.
Do not clean the hand strap with benzene, thinner, alcohol, household cleansers, etc., as these may
damage the hand strap.
Description of parts
Attaching
1.
Place the unit on a flat surface such as a desk with the screen facing down, then attach the straps to
the strap attachment holes.
Make sure there are no foreign objects under the unit.
Pass the straps through the strap attachment hole at each side of the unit (A), then pass them
through the buckles (B-C).
54
Operating Instructions - Reference Manual
A Pen holder
B Stands
Unfold the stands to use the unit upright.
C Rings
You can attach the shoulder strap.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents