Panasonic FZ-G1 Series Operating Instructions - Reference Manual page 90

When creating a barcode configuration file
1. Touch [File] - [Save as].
2. Save the barcode configuration file.
When creating and reflecting the barcode configuration file
1. Touch [Tool] - [Apply Configuration].
2. Save the barcode configuration file.
The setting of the barcode configuration file will be reflected.
If you want to reflect the barcode configuration file you created
1. Touch [File] - [Open], open the barcode configuration file.
2. Touch [Tool] - [Apply Configuration].
6. Touch [File] - [Exit].
At the confirmation message, select [Yes].
Application of INI file
1. Create the Barcode Configuration File (*.INI File). (
2. Barcode configuration file that you created by dragging and dropping the Barcode Configuration Utility (.exe), can be reflected in the
barcode reader module.
The execution file is stored below:
<For 32-bit OS>
C:\Program files\Panasonic\BCR2D_A_Set\BCR2D_A_Set.exe
<For 64-bit OS>
C:\Program Files (x86)\Panasonic\BCR2D_A_Set\BCR2D_A_Set.exe
With this method, you can reuse the INI file or make settings for another PC.
When creating a barcode configuration
- 90 -
file)