Decommissioning And Disassembling; Further Safety Regulations - BÖWE M12 Installation Instructions Manual

2 Safety Regulations
2.5

Decommissioning and Disassembling

Only skilled workers with suitable protection devices and work tools are
authorized to decommission and disassemble the system.
When decommissioning and disassembling the machine, drain all solvent
from the machine, including the pipelines, valves and fittings. You must
remove residues that could cause environmental pollution.
You must separate electric lines and pipelines that were used to supply or
drain the machine from the supply network. Make sure that they cannot
be turned on by unauthorized persons.
Have an authorized customer service technician dispose of the cooling agent from the refrigeration
unit.
2.6

Further Safety Regulations

This BÖWE drycleaning machine works with a solvent. These solvents
are harmful to the health in the context of the Hazardous Substances
Ordinance.
Drinking, eating and food storage are prohibited in the area where the machine is installed.
Open flames and fires are not allowed in the operating area. No smoking is allowed.
Install steam generators in such a way that they do not draw in air that contains solvent.
A BÖWE customer service representative must train the personnel in the operation of the
machine before the first startup. This training must include information on safe operation
and possible hazards.
The owner is responsible for employing trained personnel to load and unload the machine
and must employ well-informed and expert personnel for maintenance work. No unauthorized
personnel are allowed in the area of the machine.
The daily checks prescribed in the operating instructions represent the minimum requirements.
Operating personnel must immediately report any changes in the machine that could
affect the safety.
5 5
2
2.5
2.6
M12-M15-M18