Accessory - Dantherm HCV 300 Manual

INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Product description: Accessory

Accessory

Introduction
The unit is delivered without any accessories mounted. If further functionality is requested
the accessories are to be installed prior to initial unit installation or alternatively after commis-
sioning.
Silencer
The HCV 400 unit can be equipped with a silencer.
(for HCV 400 only)
Electric preheating
The unit can be equipped with an electrical preheating element that preheats the incoming
air. The preheater increases the outside air temperature going into the heat exchanger, and
thereby reduces the risk of ice in the heat exchanger in very cold conditions.
Water heating coil The water heating coil is controlled by the accessory control HAC 2. The water heating coil
increases the outside air temperature going into the heat exchanger, and thereby reduces the
risk of ice in the heat exchanger in very cold conditions.
Floor stand
A floor stand will raise the unit and make it
(for HCV 400 only)
easy to access the drain outlet.
Hand-held remote
Adjust the ventilation and keep track
control (HRC 3)
of the home's humidity and tempera-
tures via the large LCD screen in the
hand-held remote control. Activate
cooling function/bypass (if this is
installed in the HCV unit), select
manual ventilation steps or relevant
weekly programs or set the controls
to automatic.
The remote control can communicate with the HCV unit at up to 30 metres distance. The
remote control can be placed on level surfaces or hang on the wall.
AUTO
* *
CO 
2
°
RH%  ° °
°
Ikoner for manual
21