Cable Outlets In A Bts3900C Cabinet - Huawei BTS3900C Hardware Description

BTS3900C (Ver.C)
Hardware Description
Cable
7.8.5 BBU Alarm
Cable
RF Cables
All RF cables need to be installed onsite.
Table 7-11 RF cables to be installed onsite
Cable
7.9 RRU RF
Jumper
7.10 RRU AISG
Multi-Wire Cable
7.11 RRU AISG
Extension Cable

7.2 Cable Outlets in a BTS3900C Cabinet

All cables for a BTS3900C cabinet are routed into and out of the cabinet through the cable outlets
at the bottom of the cabinet.
Position of cable outlet modules
Cable outlet modules are on the bottom left and right sides of the OMB, as shown in
7-1.
Issue 03 (2013-05-27)
One End
Connector Installation
Position
RJ45 EXT_ALM0
connector port on the
UPEU or UEIU
One End
Connector Installation
Position
DIN male ANT_TX/RXA
connector or ANT_TX/
RXB port on the
RRU
Waterproofe RET port on the
d DB9 male RRU
connector
Standard Standard AISG
AISG male female
connector connector on the
AISG multi-
wire cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The Other End
Connector
RJ45 connector
Table 7-11 lists the RF cable connections.
The Other End
Connector
DIN male
connector
Standard AISG
female
connector
Standard AISG
female
connector
7 BTS3900C Cables
Installation
Position
External alarm
equipment
Installation
Position
Antenna system
Standard AISG
male connector
on the RCU or
on the AISG
extension cable
Standard AISG
male connector
on the RCU
Figure
128