Introduction Remote Controls Buttons - T+A FD 100 User Manual

Introduction
In general terms the buttons on the FD 100 have the same
function as the corresponding buttons on the remote control
handset supplied with the particular machine, and the buttons on
the machine itself.
The following table shows the remote control buttons and their
general functions. Since the FD 100 can be used to control a
large number of different devices, these instructions are limited
to describing the basic functions. For more details please always
refer to the operating instructions supplied with the machine in
question.
 Switches the device on an off

Source select button
(yellow)

Direct alpha-numeric input, e.g. track number, quick

station select, radio station
abc
Special characters are also assigned to the 
...
and  buttons.
During the text input process it is possible to switch

between numerical and alpha-numeric input, and
xyz
between capital and lower-case letters, using the

 button.

Switches between loudspeaker and headphone
mode
(Mode)

Switches the loudspeakers on and off (MUTING)
(yellow)

Reduces / increases volume (volume control rocker)
(yellow)
Tone settings

 Switches between the video formats


Navigation buttons


Confirmation button during input procedures

Selects the previous track

Selects the next track

 Manual reverse tuning / search
Manual forward tuning / search

 Repeat function / Shuffle
 Ends playback / back button
 Play / pause function
20