Table of Contents
Advertisement
Figure 20. Opening the release latches
5. Place the PCIe3 6-slot fanout module on an electrostatic discharge (ESD) surface.
6. Place the PCIe3 6-slot fanout module in a safe place.
7. Install the filler.
Figure 21. Installing the filler
8. Put the cable management bracket in the operating position. See Figure 22 on page 21.
a. Pull out the quarter-turn fasteners (B) and turn them to disengage them while moving the cable
management bracket (A) to its lower position.
b. Turn the quarter-turn fasteners (B) to engage and lock the bracket into position.
20
Power Systems: PCIe3 6-slot fanout module for the EMX0 PCIe Gen3 I/O expansion drawer
Advertisement
Table of Contents
