Table of Contents
Advertisement
Figure 14. Replacing the voltage regulator module
4. Place the new PCIe3 6-slot fanout module into the expansion unit chassis. Support the weight of the
PCIe3 6-slot fanout module by holding it at the bottom while you push it in.
5. Push the release latches (B) on the PCIe3 6-slot fanout module (A) toward the system until they lock
in place. See Figure 15 on page 15.
14
Power Systems: PCIe3 6-slot fanout module for the EMX0 PCIe Gen3 I/O expansion drawer
Advertisement
Table of Contents
