Table of Contents
Advertisement
Figure 11. Removing the voltage regulator module
7. Label the PCIe adapter cassettes so that they can be installed again in the correct order. To remove the
PCIe adapter cassettes from the PCIe3 6-slot fanout module, complete the following steps:
a. Release both latch doors (B) by pressing the latch levers (A) in the direction shown in Figure 12 on
page 12. The latch doors (B) automatically rotate in the direction shown in Figure 12 on page 12.
b. Lift the handle of the PCIe adapter cassette (C) and pull out the PCIe adapter cassette (D) from its
slot as shown in Figure 12 on page 12.
c. Place the PCIe adapter cassette with the cover facing up on an approved ESD surface.
d. Repeat steps 7b and 7c for each PCIe adapter cassette in the PCIe3 6-slot fanout module.
PCIe3 6-slot fanout module
11
Advertisement
Table of Contents
