Table of Contents
Advertisement
Figure 10. Opening the release latches
5. Place the PCIe3 6-slot fanout module on an electrostatic discharge (ESD) surface.
6. Remove the voltage regulator module. See Figure 11 on page 11.
a. Press the release latch (A) and lift the latch up to open it.
b. Pull the voltage regulator module out of the fanout module.
c. Place the voltage regulator module on an ESD surface.
10
Power Systems: PCIe3 6-slot fanout module for the EMX0 PCIe Gen3 I/O expansion drawer
Advertisement
Table of Contents
