Advertisement
7. Upon delivery, the screen is preset to the limit positions specified in the order. Shall the screen position
be incorrect (too low or too high), the end-positions can be adjusted using the special key provided in the
installation kit (Figure 10.).
NOTE! Only qualified persons may perform the end-position adjustments. All adjustments made shall be
the sole responsibility of the user. Non-qualified adjustment of the mechanical settings may cause damage
to the screen and shall void any guarantee claims.
Access to the end-position adjustment mechanism
Figure 10
8. In the case of screens equipped with a side tensioning mechanism, unroll the whole surface of the screen.
If necessary, adjust the tensioning force with an Allen key (screws on both sides of the lower bar).
w
w
w .
k
a
u
b
e
r .
e
-8-
u
Advertisement
