Advertisement
Blue Label is a series of electrical projection screens with aluminum housings. Their timeless design
and a broad selection of projection screen materials make them the screen of choice for home cinema and
conference room applications. In the Tensioned version, the screen is additionally equipped with a set of
tensioners improving flatness of the projection surface.
INSTALLATION AND APPLICATION GUIDELINES
1. The housing and lower beam of the screen are protected against mechanical damage with polyurethane
foam. Do not remove the main housing protection before step 4 and the lower beam protection before step
6 of this assembly and installation manual.
2. The screen shall be installed away from humidity and direct source of strong sunlight.
3. Use a soft damp cloth to clean the screen. Do not use active cleaning chemicals. Protect the screen
assembly from penetration of water or other liquids inside the housing. Carefully wipe the screen dry after
cleaning, to remove any moisture.
Projection screen
Mounting bracket for ceiling installation (flat)
Mounting bracket for wall installation (angle)
Ø14 rawlplug for wall installation
Ø10 rawlplug for ceiling installation
M6x12 screw
M6 washer
L-shaped screen locking and safety bar
Chain (screen installation aid)
Screen limit position adjustment key
Wall-mounted control switch panel (accessible for screens without built-in wireless
controller)
IMPORTANT!!!
Content of the set:
w
w
w .
k
a
u
b
e
r .
e
-2-
Qty.
1
2
2
8
8
8
8
4
2
1
1
u
Advertisement
