Table of Contents
Advertisement
3.2.3.4
Dive depth incremental alarm
In initial factory settings the dive depth
incremental alarm is switched off.
You may select the alarm value from 5 to
100m (20 to 330ft) in 1m/5ft increments,
and the direction can be selected as UP/
DOWN/BOTH. Press the +/UP or -/DOWN
buttons to select direction, then the SEL/
ESC button, then the +/UP or -/DOWN
buttons again to set the depth, followed by
a final press of the SEL/ESC button to save
the setting.
A1 USER MANUAL
3.2.3.5
Dive time interval alarm
By pressing the SEL/ESC button the
function will be highlighted and you may
enable or disable the dive time interval
alarm by choosing AUDIBLE or OFF by
pressing the +/UP or -/DOWN buttons.
By selecting AUDIBLE and then pressing
the SEL/ESC button the time value will
be highlighted, and by pressing the +/UP
or -/DOWN buttons you can select the
interval from 15 seconds up to 10 minutes
in 15 second increments. By pressing the
SEL/ESC button again the settings will be
confirmed.
3.2.3.6
Surface interval alarm
By pressing the SEL/ESC button the
function will be highlighted and you may
enable or disable the surface interval alarm
by choosing AUDIBLE or OFF by pressing
the +/UP or -/DOWN buttons. By selecting
AUDIBLE and then pressing the SEL/ESC
button the time value will be highlighted,
and by pressing the +/UP or -/DOWN
buttons you can select the interval from 15
seconds up to 10 minutes in 15 second
increments. By pressing the SEL/ESC
button again the settings will be confirmed.
29
Advertisement
Table of Contents
