A1 Settings And Menus On The Surface; General Settings; User Settings; Backlight - Uwatec Aladin A1 User Manual

3. A1 SETTINGS AND
MENUS ON THE
SURFACE
In this chapter the settings that can be
completed on the surface are described.
These settings will allow you to personalize
your A1 as desired.
3.1

General settings

In the Settings menu the following
functions can be set:
• Watch settings – please refer to chapter
2.1 Clock setting functions.
• User settings – backlight, display
contrast, units, owner info, desaturation
reset, service check, current software
version.
• Swim settings – swim stroke depth and
length.
• Sound settings – enable or disable
button beeps, dive warnings.
• Battery – check battery status.
SETTINGS
ESC
20
DOWN
SEL
WATCH
ESC
UP
DOWN
USER
UP
DOWN
SWIM
UP
DOWN
SOUND
UP
DOWN
BATTERY
UP
DOWN
RETURN
UP
3.1.1

User settings

This section allows you to customize your
A1 to your liking. Settings like backlight
duration, display contrast and units can be
changed here.
SEL
USER
ESC
ESC
3.1.1.1

Backlight

In the User submenu press SEL/ESC to
access the backlight settings. The duration
of the backlight can be set from 5 up to 30
seconds using +/UP or -/DOWN buttons
and saved with another press of the SEL/
ESC button.
3.1.1.2

Contrast

In the User submenu toggle down to
Contrast and press SEL/ESC to access
display contrast settings. Contrast can be
set from 0 up to 15 using +/UP or -/DOWN
buttons and saved with another press of
the SEL/ESC button.
DOWN
LIGHT
UP
DOWN
CONTRAST
UP
DOWN
UNITS
UP
DOWN
OWNER
UP
DOWN
DESATURATION DESATURATION
UP
DOWN
SERVICE
UP
DOWN
RETURN
UP
A1 USER MANUAL