Canon imageCLASS MF8380Cdw Starter Manual page 15

1 2
Preface Installing the Machine
2.
Select the fax receive mode.
You can specify how the machine should operate for a fax call or telephone call.
By answering the prompts that appear on the display, the machine will be set to one of the following four operation modes.
<Auto><Fax/Tel Auto Switch><Answering Machine><Manual>
* You can set a receive mode other than the above manually depending on your country or region. For details on the setting procedure, see "Receiving Faxes" in the e-Manual.
Do you want to use
this machine for fax
only (no telephone)?
Yes
No
No
Do you want to auto-
receive faxes and
answer phone manually?
Yes
No
No
Do you want to use
an answering machine
to answer the phone?
Yes
No
No
The receive mode is set to <Manual>.
→ Proceed to Step 3.
• Responds to both a telephone
call and fax with handset
pickup.
• Rings when receiving a call
or fax.
3
Configuring and Connecting the Fax
• Receives a fax automatically.
• Does not use the telephone or optional handset.*
Yes
* If connecting with the telephone or optional handset in auto receive
mode, the incoming ring sounds when receiving a fax or telephone
call. You can answer the telephone while the incoming ring is
sounding. To configure so that the incoming ring does not sound, see
"Incoming Ring" in the
The receive mode is set to <Fax/Tel Auto Switch>.
• Receives a fax automatically.*
Yes
• Responds to a telephone call by
picking up the handset.
* An incoming ring sounds. To configure so that the incoming ring does
not sound, see "Incoming Ring" in the
Yes
The receive mode is set to <Answering Machine>.
• Receives a fax automatically.
• Responds to a telephone call with
the built-in answering machine.
• Rings when receiving a call or fax.
4
Connecting to a Computer and
Installing the Drivers
The receive mode is set to <Auto>.
→ Proceed to Step 3.
e-Manual.
→ Proceed to Step 3.
→ Proceed to Step 3.
Appendix
e-Manual.
8