Assembling The Nc-500 Piano Stand - Korg Concert NC-500 Series Owner's Manual

Assembling the NC-500 Piano Stand

Assembly must be carried out by at least
two persons.
Precautions
To ensure saf e and correct assemb ly, please obser ve
the f ollowing precautions.
❏ Be sure to use the correct parts at each step, be
sure that parts are oriented correctly, and be sure
to follow the steps in the order given below.
❏ When lowering the piano body onto the stand,
position hands carefull y so that hands don't g et
caught between the body and the stand.
❏ After setting the body in place on the stand: Do
not press or lean hea vily on the fr ont side of the
piano bod y until you ha ve securel y fastened it
to the stand. The bod y may fall from the stand
if you lean or press in the wr ong place .
What You Will Need...
You will need a Phillips (cr osshead) scre wdriver.
Assembly Procedure
1. Open the bo x and tak e out the contents .
Be sure that y ou ha ve all of the items sho wn
belo w.
Sideboard A (left side)
Assembly Accessories
1) 2 piano fasteners
2) 4 caps
50
Warning
Speaker Box
Pedal Unit
Sideboard B (right side)
3) 4 screws (M6 × 26)
6) 1 pedal cord
4) 4 spring washers
7) 3 cord holders
5) 4 flat washers
2. Assemb le the sideboards and speak er box.
Fit the ends of the speaker box into the metal
fittings on the two sideboards, lining up the screw
holes at both sides. Be sure that each end of the
box is flush against the corresponding sideboard,
with no gap. Then take the four screws (3), set a
spring washer (4) and then a flat washer (5) onto
each of these screws, and use the screws (two for
each sideboard) to fasten the sideboards to the speaker
box.Cover the top of each screw with a cap(2).
5
4
Set the speaker box so that the speaker cord is at the top.
3
Speaker Box
Sideboard A
(left side)
Right
No gap.
3. Mount the piano on the assemb led stand, and
fasten it into place .
Set the piano so that the plastic feet on the piano
body fit into the holes in the metal fittings of the
sideboards. Then fasten the piano body into place
from the bottom with the two piano fasteners(1).
Set the piano into place slowly and carefully,
taking care not to drop it. When lowering the
piano, position hands carefully so that they don't
become caught between the piano and the stand.
Piano fastener
2
3,4,5
3,4,5
2
Wrong
Sideboard B
(right side)
Gap.
Piano fastener